Smooth-On

Sil-Poxy Platinum & Tin-Cure Silicone Adhesive

Rating:
100 % of 100

Type

Size

Grouped product items
Sil-Poxy Silicone Adhesive - 1/2 oz. Tube
Net Weight: 0.01 Kg
76 in stock
NZ$25.94
Tax included
Qty
Sil-Poxy Silicone Adhesive - 3 oz. Tube
Net Weight: 0.09 Kg
139 in stock
NZ$69.99
Tax included
Qty
Sil-Poxy Silicone Adhesive - 10g Pouch
Net Weight: 0 Kg
30 in stock
NZ$19.99
Tax included
Qty

Sil-Poxy™ is a one-component adhesive made specifically for bonding Smooth-On RTV moldmaking silicone rubbers to silicone rubber and other substrates including some plastics (urethane), plasters/ceramics, fabrics, etc.

Sil-Poxy™ will work with tin- or platinum-cure silicones and provides a strong, flexible bond between silicone parts with high elongation. Can be colored with Silc-Pig™ silicone pigments. Cured adhesive resists weathering, moisture, UV and high temperatures.

Sil-Poxy™ can be used for repairing torn silicone rubber molds. Other applications include bonding of silicone for prosthetics and animatronics. Cured Sil-Poxy™ is certified skin safe.  IMPORTANT - Do not apply to skin in liquid form.

Features

  • Can be used repairing torn silicone rubber molds.
  • Will work with tin- or platinum-cure silicones
  • Provides a strong, flexible bond

Instructions

Safety - Use in a properly ventilated area ("room size" ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Dispensing - Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly.

Applying - Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour. Full cure is attained after 24 hours. Warmer temperatures (and higher humidity) will result in a faster cure. Lower temperature will retard cure.

Write Your Own Review
Share your review for:Sil-Poxy Platinum & Tin-Cure Silicone Adhesive
Your Rating


Customer Reviews (5) Write a Review

5 Item(s)

Show per page
  1. Rating
    100%
    Great product
    Silpoxy is a very handy product to have for quick fixes on silicone
    Sets quick and not much is required

    Review by

  2. Rating
    100%
    excellent
    small but you dont need much

    Review by

  3. Rating
    100%
    It works very well as
    It works very well as expected.

    Review by

  4. Rating
    100%
    Fantastic products and excellent How To video's
    This adhesive works really well. It repaired my split silicon prosthetic. I wish I knew about the webbing to add to the back but the glue holds really well.

    Review by

  5. Rating
    100%
    . The best
    Great product. A little pricey but you only use a small amount and it dosnt go off in the tube. It sets strong and really works well. The team posted quick.

    Review by