EnviroTex Lite™ is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use.
- The original 1:1 epoxy coating system since 1969
- Convenient 1:1 mix ratio by volume
- 20-30 minute working time / 8-12 hour tack-free time
- Full cure in 72 hours
- FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.
- Self-levels to approximately 1/16" (1.6mm)
- Produces a durable high-gloss surface coating for artwork, table tops, crafts, and more!
Food Grade?
FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. Keep in mind that epoxy is easy to scratch and is not suitable for projects where sharp objects will contact the surface.
Estimated Coating Calculator
Volume | Coverage (sqm) | Coverage (sqft) |
4oz (118ml) | 0.09 sqm | 1 sqft |
8oz (236ml) | 0.18 sqm | 2 sqft |
1 Pint (475ml) | 0.37 sqm | 4 sqft |
1 Quart (946ml) | 0.75 sqm | 8 sqft |
1/2 Gallon (1.88L) | 1.5 sqm | 16 sqft |
1 Gallon (3.78L) | 3 sqm | 32 sqft |
-
Excellent productGreat product. Easy to follow instructions with great results.
-
My go to resinWhile expensive this resin easiest to use and love the result on my art.
-
Not used yetHaven't used the product yet
-
Enviro Tex LiteVery good service thank you. There is every different container size available depending if you want less than half a gallon or a gallon kit. Thank you.
-
Enviro Tex Lite Pour-on ResinBest Resin I've ever tried and I've tried a few. So easy to mix. 1:1 ratio, can't go wrong. Finished product, so beautiful, takes my Art to a whole new level.