Plasti-Paste™ EPOXY is a two component fiber resin that is designed for vertical surface application. Part A is a paste and Part B is a liquid. Mix ratio is 2A : 1B by volume. It has a pot life of 40 minutes and the demould time is 16 hours.
Plasti-Paste™ EPOXY offers some advantages over urethane Plasti-Paste™ products:
- Material is not affected by moisture.
- Material has a longer working time for applying over large areas.
- Cured material is more rigid with less being required for making support shells/mother moulds
- Higher heat resistance up (160°F / 71°C).
Write Your Own Review
✖